Suitable for aesthetic coating of steel surfaces exposed to permanent high (max. 400 °C) temperatures. Paint has satiny finish.
Paint can be applied on an oxide-free (sand-blasted) and degreased surface by spraying or dipping. Recommended maximum dry film thickness : 15-25 μm. Coating reaches tack free condition within 15-20 minutes, only after this it is recommended to use forced drying. Coating cures thoroughly at 25° within 40-60 minutes, at 80° C curing time can be decreased to 15-20 minutes. Only after this it is recommended to expose the paint to higher temperatures, by keeping an even rate of heat up.
Our R&D Department elaborates paint formulations for industrial use. Primary task is to realize FKI's own product development targets. Technical Service lab is part of the R&D department, which adjusts the paint parameters to customers' requirements and renders direct technical assistance.
We take part in national and international development projects in cooperation with industrial partners and university research teams.
Research and DevelopmentThe aim of the paint industry experts' work is to ensure high quality surface-protection job for the customers. The preconditions of the successful execution of painting and surface-protection process are the elaboration of the technology most suitable for on-site needs, the correct choice of the coating and the monitoring of the execution.
The tests required for our expert activities are carried out according to the current MSZ EN ISO standards.
Expert activityDevelopment engineer/ Technical Service Unit
+36 1 4328844 horvath.szilvia[kukac]festekkutato[d0t]hu
Please feel free to contact our colleagues or call us
on the following number: +36 1 432 88 31