Suitable for aesthetic coating of steel surfaces exposed to permanent high (200-600 °C) temperatures. Paint has satiny finish.
Paint can be applied on an oxide-free (sand-blasted) and degreased surface by spraying or dipping. Recommended maximum dry film thickness : 15-25 μm.
After air drying at room temperature full physical hardening will occur by curing at 180 °C for about 30 minutes. Higher temperatures (200-220° C) are advantageous for achieving higher hardness and scratch resistance. After this forced curing the coating can be exposed to higher temperatures, heated up at an even rate.
Our R&D Department elaborates paint formulations for industrial use. Primary task is to realize FKI's own product development targets. Technical Service lab is part of the R&D department, which adjusts the paint parameters to customers' requirements and renders direct technical assistance.
We take part in national and international development projects in cooperation with industrial partners and university research teams.
Research and DevelopmentThe aim of the paint industry experts' work is to ensure high quality surface-protection job for the customers. The preconditions of the successful execution of painting and surface-protection process are the elaboration of the technology most suitable for on-site needs, the correct choice of the coating and the monitoring of the execution.
The tests required for our expert activities are carried out according to the current MSZ EN ISO standards.
Expert activityDevelopment engineer/ Technical Service Unit
+36 1 4328844 horvath.szilvia[kukac]festekkutato[d0t]hu
Please feel free to contact our colleagues or call us
on the following number: +36 1 432 88 31
